【JS-RM07】Garage Door Opener(Flagship Model)

Safety：

• Idling monitor: If the idling duration exceeds 40 seconds, system determines this as malfunction, thus shuts down the motor automatically to prevent overheating.

• Overload protection: Export circuit fuse incorporated to prevent overload and unusual increase of electricity current flow which can damage remote control and motor.

• Overheating protection: When the system overheats, its thermal-fuse breaks and the system shuts down automatically; it will return to its original state when temperature falls back to normal.

• Individually adjust the pull force and pressure: The pull force and pressure are adjusted individually on the mainboard.

• Premium pressure-sensitive protection device: When pressure sensitive roller door senses an obstruction, it immediately stops within 0.5 seconds and operate reversely to prevent accidents.

• Roller door sensor: When it is moving upwards and senses external force that is pulling it down, it stops immediately to prevent rolling up objects.

• Customizable infrared ray monitor: When it detects any motion nearby as the roller door is shutting down, and the roller door will stop immediately to prevent accidents.

• Supports external lights: Lights up whenever the roller door is operating and is able to extend illumination for 60s after activation of the roller door.

• Customizable external warning light: When the roller door is operating, the warning light turns on automatically.

• Supports door-closed signal light: When the roller door is completely closed, the light turns on.

• Audio signal setting: Allows users to determine the processing operation; it can be switched off.

• Slow-start and slow-stop feature: When this function is activated, the noise produced during starting or stopping the door operation can be reduced, and accidents can be prevented.

• Operation speed adjustment: The speed of operation of the roller door can be customized according to needs.

Security：

• Door sensor: Protect doors from intrusion; when the system detects someone is breaking in, it automatically activates warning alarm and locks the door.

• The two-door interlock function: The function is designed to make two doors cannot be opened simultaneously. Install the lower limit of each of the two control units to an interlock contact with each other to enable interlock functions.(Pairing with the interface board is necessary)

• Optional external installation of flash and loud speaker: Enhances door sensor and security alarm system.

• Self-closing function: The door closes automatically after the pre-set duration.

• Optional timer for self-closing: Works in conjunction with the self-closing function to show the time remaining before closing the door.

• Remote control lock: Prevents opening of the roller door from accidental activation; and this can be disabled.

Convenience：

• Multiple-control: One remote control can control up to 12 roller doors.

• Optional roller-door counter: Open-and-close is counted as one time; reminds user to maintain the motor and roller-door periodically.

• Optional 3-button switch: 3 buttons that controls on, off and stop separately.

• Supports single recurrence button: It controls on, off and stop in a cycle.

• Optional uninterruptible power supply: Continues to operate when power supply is interrupted.

• Roller-door operational-direction change: This can be done using remote control setting without changing the motor wiring.

• To control the door by smartphone: To Pair up with JS-IoT22D to control the door by smartphone.

• Unnecessary to extra install door contact sensor or interface board to get activity alerts(Optional Purchase). The remote and smartphone have the capability to lock or unlock each other.