Embedded Files
Specification
Specification
AC Voltage：100V/110V/120V/115V/127V/ 200V/220V/230V/231V/240V/380V/415V
Standby Current：20mA
Distance：80m/100m/160m/200m(Straight Line Open Space)
Password Combination：512 (9 Position two-State IC DIP Switch)
Size：160x126x50mm
Remote Storage Maximum：Unlimited
Applicative Range
Applicative Range
Feature
Feature
- Protective slider: setting area is protected by the slide cover which is beautiful, easy to use and maintain.
- Modularization: the model adopts Surface Mount Technology to increase flexibility in customizing device function.
- Loop protection: when the main device is installed, it provides loop protection to prevent short circuit.
- Optional safety protection device: When pressure sensitive roller door senses an obstruction, it immediately stops and operate reversely to prevent accidents within 0.5 seconds.
- Super Long range remote control: the remote control can control up to 200m in an obstruction-free straight line.
- Roller-door operational-direction change: this can be done using remote control setting without changing the motor wiring.
- Remote control lock: prevents opening of the roller door from accidental activation; and it can be disabled for public roller doors.
- Simple DIP-switch setting: passcode setting uses 2-phase-9-digit DIP switch (2 states: upper and lower states) with 512 sets of combination.
Receive Distance Comparison Table
Receive Distance Comparison Table
Standard Distance(Super-Regenerative Receiver)
- Standard Distance Remote(m) ：80
- Long Distance Remote(m)：160
- Frequency(MHz)：336
Long Distance(ASK Receiver)
- Standard Distance Remote(m)：100
- Long Distance Remote(m)：200
- Frequency(MHz)：336
Remark：It is a test under obstruction-free straight line open space and the signal may decrease due to the installation enviroment. If it needs to improve signal range, please pull the receiver antenna out of the motor cover steel box.
Comparison Table
Comparison Table
Custom
Custom
- Custom Stickers MOQ：500 Sets.
- Custom Stickers：W35mm x H20mm
- Sitcker Pringting Size：W33mm x H18mm
- Printing range will be less than sticker size 1~2mm.
- For the best visual effects, please upload your work at least 300 ppi.
- All templates are in JPG, PNG, AI and PSD format.
- Make sure your work are in create outline format.
- Choose laser stickers or brushed metal stickers material as option.
- The schematic drawing is for reference only. The real object should be considered as final.
Report abuse